• Scupper Valve 72mm Dia

Scupper Valve 72mm Dia

38776-1

Scupper Valve

Provides a water exit for boats with self-bailing cockpits.
Acetal construction.

Accommodates 3875B thru-transom thru-hull connector (screw holes must be drilled for installation.)
Diameter: 72 mm. Use as a replacement valve for 3881 Thru-Transom Scupper.

Caution: Thru-Hull connectors are designed for installation above the water line only.

  • $34.99

    [$34.99]
- +
 

The Attwood Scupper Valve is designed for boats with self-bailing cockpits. It is designed to be mounted over existing thru-hull fittings up to 2" (51mm). The Scupper Valve is a combination of a corrosion- resistant retainer ring, screws, rubber flapper valve and gasket.

The rubber flapper valve opens outward to allow water to exit and automatically closes to help prevent backwash from entering the cockpit.

The Attwood Scupper Valve is to be mounted on the transom above the boat's maximum water line as determined by the boat's draft at the maximum loading as recommended by the boat manufacturer.

TOOLS REQUIRED:

Drill and drill bit

Phillips screwdriver 

INSTALLATION INSTRUCTIONS:

NOTE: The Scupper Valve can be mounted two ways: on the transom above the water line , or the boat floor via thru-hull drain fitting, hose, and cockpit drain.

Write a review

Please login or register to review

Related Products

Ball Scupper Large - Clear  Drain Valve 114mm

Featured Brands